Vertical machining center - FEELER
FEELER’s vertical machining centers(Linear) insists on stable quality and customer satisfaction first. FEELER keeps material inspection and check at each manufacturing stage to produce the most reliable vertical machining centers(Linear) in the market.
VMP Series

Vertical Machining Center VMP-30(A)



1.The Arm Type tool changer features random tool selection for quick and smooth tool changing. The Carrousel Type tool changer meets your flexible machining requirements for molds and parts production.
 
2.Perfect Structure Design,  Equipment with high speed servo system,  Feedrate increased to 48m/min.(OPT)
 
3.The P4 angular contact bearings ensure the spindle’s maximum rigidity and highest accuracy.  Through dynamic balancing of each spindle, the vibration is reduced to less than 0.002mm at top speed.
 
4.No Counter-balance Weight on Z-axis, and increased Z-axis motor horsepower combined  with brake.

 

TRAVEL

X-axis travel 760mm
Y-axis travel 420mm
Z-axis travel 510mm
Spindle nose to table surface 80mm-590mm
Spindle center to column surface 455mm
Table surface to floor 820mm
Table center to column surface 245mm-665mm

SPINDLE

Spindle speed 10,000rpm
Spindle taper 7/24 Taper No.40
Spindle power 7.5/11 Kw

FEEDRATE

X-axis rapid traverse 36m/min
Y-axis rapid traverse 36m/min
Z-axis rapid traverse 36m/min