5 axis machining center, 5 axis CNC machine - FEELER
FEELER’s 5 axis vertical machining centers insists on stable quality and customer satisfaction first. FEELER keeps material inspection and check at each manufacturing stage to produce the most reliable 5 axis vertical machining centers in the market.
U Series

U-250



Optimization of the structure
•Base structure design optimization grants high stability and rigidity for better quality/price.
•The large box structure design of the casting substantially elevates rigidity and stability of the machine.
•The overlapped 3 axis and the travelling column design prevents machine deformation during the X/Y-axis movements. The spindle is mounted on the Z-axis with minimum distance and suspension, therefore the variable load on spindle is very low, providing the best possible dynamic accuracy.

Structure design following the Abbe principle
eliminating the suspension structures on 3 axis  the loading/stress on the axes caused by the counter force generated while machining the workpiece is reduced.

Done in One” concept
Reduce the loading and unloading time, design of the wide surface is narrowed to save space and to shorten the operator's working time. Fast displacement with high acceleration and deceleration effectively shortens the non-machining time.



 

 

TRAVEL

X AXIS TRAVEL 350mm
Y AXIS TRAVEL 300mm
Z AXIS TRAVEL 250mm
SPINDLE NOSE TO TABLE SURFACE Z AXIS 135mm-385mm
TABLE SURFACE TO FLOOR 860mm(±5mm)

SPINDLE

SPINDLE SPEED 10,000rpm
SPINDLE NOSE 7/24 Taper NO.30
SPINDLE MOTOR 3.7/5.5 Kw

FEEDRATE

RAPID TRAVERSE X AXIS 36m/min
RAPID TRAVERSE Y AXIS 36m/min
RAPID TRAVERSE Z AXIS 36m/min

CONTROLLER

FANUC 0IMD/0IMF